Ply Metal Drillers

Fasten Wood to Steel Better with Wings. Steeler Ply Metal Drillers are manufactured with wings between the thread and driller tip to maintain a heavy-duty hold in wood to metal applications . For your plywood or composite to metal fastening, Ply Metal Drillers are a superior choice.

Part #	Size	Qty	Wt	Applications
RT10-1716 RT10-212 RT12-2 RT12-212 RT12-258 RT12-234	#10 x 1-7/16” #10 x 2-1/2” #12 x 2” #12 x 2-1/2” #12 x 2-5/8” #12 x 2-3/4”	4M 1.5M 1.5M 1M 1M 1M	38.3 21.8 24 19.8 23 23.8	Best for plywood or composite to metal. Identified by all reamer TEK head, winged pattern near bottom & zinc coating.

Part #

Size

Qty

Applications

RT10-1716

RT10-212

RT12-2

RT12-212

RT12-258

RT12-234

#10 x 1-7/16”

#10 x 2-1/2”

#12 x 2”

#12 x 2-1/2”

#12 x 2-5/8”

#12 x 2-3/4”

1.5M

38.3

21.8

19.8

23.8

Best for plywood or composite to metal.

Identified by all reamer TEK head, winged pattern near bottom & zinc coating.

Driller tip installs faster: The driller tip on our Ply Metal Drillers finds its way through wood and steel framing easier, saving you time and effort on installation.
Bugle head adds stability: The bugle head on our Ply Metal Drillers allows for easier installation and less wobble.
Winged design adds strength: The wing between the thread and driller tip allow for better hold in wood and steel fastening systems.

Ply Metal Drillers feature a designed wing, driller tip, and fine thread. Use a #2 Phillips for this bugle head screw. Part numbers are RT10-1716, RT10-212, RT12-2, RT12-212, RT12-258, and RT12-234, with all options featuring a zinc coating. Steeler Ply Metal Drillers meet one or more of ASTM C954, C1002 & C1513 as well as ISO 9002 and 14001.

Steeler Screw Chart

Wafer Head Drillers

The Screw for Interior Finishing. Period. Wafer Head Drillers are one of our most popular screws and for good reason. Metal lath and interior finishing products can vary in properties and user friendliness, but these screws feature an extra wide washer and driller or super point to attach metal lath to steel framing up to 12 gauge easier, allowing you to work smarter, not harder.

Bit Tips

The Right Tip for Every Fastener.Steeler carries a complete line of bit tips to fit any screw head you might come across on-the-job. Because we know that discovering you don’t have the right bit tip just as you’re about to install the first stud is a bit like getting to the first tee and realizing you don’t have any golf balls.