Pony Wall Supports
Add Pony Power to your Walls. Steeler Pony Wall Supports bolster steel framing walls by attaching to either side of your wall's "C" stud. While engineered for shorter walls to ensure balance and prevent tipping, Steeler Pony Wall Supports can be custom-built for walls up to 10'. Ask about adding horsepower to your next project!Contact us to order
Steeler Pony Wall Supports are offered in tough 14 gauge steel and meet or exceed ASTM A653. Pony wall supports are comprised of an upright 14 gauge “C” member that is welded to a bottom plate, and include pre-drilled holes for easy installation.
- Help prevent future work when walls tip: Shorter walls can be easier to tip, which is why Steeler developed its Pony Wall Support. Add balance to your wall system as a preventative measure for rebuilds.
- Easy installation:Pre-drilled holes in the pony wall support base plate save you a step on installation, while slightly rounded tubing means easier stud installation (when compared with square tubed pony wall supports).
- Save money in the long-term: We use a full zinc coating to greatly minimize rust formation, meaning your walls will last longer. Steel framing is not compromised by termites or mold, and holds up better against acts of nature when compared to wood framing.
- Earn LEED Credits: Due to levels of recycled content in the coils we use, our steel studs are considered a green product, which can earn your projects LEED® points.
Height Offerings:Standard heights are 30”, 48” and 60”, but custom pony wall supports up to 10’ may be requested.
Bottom Plate Width Offerings: 2-1/2” or 3-1/2”.
For more specifications, including Limiting Heights and Section Properties, see our Support section.
You may also be interested in
Get the Basics Right: The Timeless U-shaped Track. A steel framing system begins with steel studs and track. What started as an easier-to-use and more durable replacement for wood framing is now a fixture in the commercial building industry and an up-and-comer on the residential front. Steeler has been manufacturing steel track for over 40 years, and with that experience comes a time-tested level of quality, knowledge and service.
The Screw for Interior Finishing. Period. Wafer Head Drillers are one of our most popular screws and for good reason. Metal lath and interior finishing products can vary in properties and user friendliness, but these screws feature an extra wide washer and driller or super point to attach metal lath to steel framing up to 12 gauge easier, allowing you to work smarter, not harder.
Get the Basics Right: The Classic “C” Stud. A steel framing system begins with steel studs and track. What started as an easier-to-use and more durable replacement for wood studs is now a fixture in the commercial building industry and an up-and-comer on the residential front. Steeler has been manufacturing steel studs for over 40 years, and with that experience comes a time-tested level of quality, knowledge and service.